Laser Receiver "Gyro Tracer - Futech GYRO RED Mode D'emploi

• Without this function the laser would stop spinning and re-level all the time.
•
ATTENTION: In this mode, the highest precision is not guaranteed.
Laser receiver 'Gyro Tracer'
•
Use the laser receiver with strong light intensity, like for example working
outside and for working at large distance
•
If you have chosen another receiver, use the manual that is delivered with it.
• Remove foile protection from the device.
•
Open the battery place and place the battery as the polarisation indicates.
• Turn the receiver on by key (16) , the battery indicator will light up in the lcd
display on the left bottom.
• On the right top of the lcd display, the precision mode is indicated. You can
change this by pressing key (20). This fine adjustment has one lying bar, and
the coarse adjustment has 2 lying bars.
•
ATTENTION: each time the device is turned on the coarse adjustment is acti-
vated.
•
ATTENTION: for an optimal reception, make sure the laser is at the highest spin-
ning speed (600 rpm)
•
Move the laser receiver up and down in the horizontal position to detect the
horizontal laser beam.
•
As soon as the receiver area (19) detects the laser, the laser position indicator
(18) will light the LCD's up and will indicate the direction where the laser beam
precisely will be.
•
If the indicator arrow changes in one bar, the laser beam is precisely in the
middle of the receiving field. (19) Use the marking line when appropriate.
•
The measuring rod holder allows you to set up the laser receiver on measuring
sticks, with this you can simply calculate height differences.
GYRO RED / GYRO GREEN
EN
47