Publicité
Les langues disponibles
Les langues disponibles
INSTAL TION REQUIREMENTS
Gather the required tools and parts before starting installation.
The parts supplied are in the washer basket.
Tools needed for connecting the drain hose and water
inlet hoses:
[]
Pliers that open to 1%6"
[]
Flashlight (optional)
(39.5 mm)
NOTE: Replace inlet hoses after 5 years of use to reduce the risk
of hose failure. Record hose installation or replacement dates for
future reference.
Parts supplied:
Alternate
Parts
Your installation may require additional parts. If you are interested
in purchasing one of the items listed here, call the toll-free
number on the cover or in the "Assistance
or Service" section.
if You Have:
You Wii{ Need to Buy:
:::::::::::_1_HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH_j_HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHr_j_HHHH
r,
Laundry tub or
Sump pump system (if not already
standpipe taller
available)
than 96" (2.4 m)
1 " (25 mm)
diameter standpipe
2" (50 mm) diameter to 1" (25 mm)
diameter standpipe adapter,
Part Number 3363920 and connector
kit
Part Number 285835
Overhead sewer
Standard 20 gal. (76 L) 39" (990 mm) tall
drain tub or utility sink, sump pump and
connectors
(available from local
plumbing suppliers)
Floor drain
Siphon break, Part Number 285834;
additional drain hose,
Part Number 8318155 and connector kit,
Part Number 285835
Water faucets
2 longer water fill hoses:
beyond reach of fill
6 ft (1.8 m) Part Number 76314,
hoses
10 ft (3.0 m) Part Number 350008
Lint clogged drain
Drain protector, Part Number 367031
B
C
D
A. Drain hose form
B. Water inlet hoses (2)
C. Flat water inlet hose washers (4)
D. Beaded tie strap
Tools needed for securing the drain hose and leveling
the washer:
[]
[]
Adjustable or open end
wrench %6" (14 mm)
Level
[]
Wood block
[]
Ruler or measuring tape
3
Publicité
