Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Switching on and off
When the appliance is connected to the power supply, the display will show '- -'. If you do not
touch any key within 1 minute, the display will switch off.
1. Touch the On/Off key for three seconds.
▷
The set temperature is displayed; the refrigerator is switched on.
2. Touch the On/Off key for three seconds again to switch off the refrigerator.
Setting the temperature
1. Touch (several times) the temperature key to set the temperature of the refrigerator
compartment.
The temperature of the refrigerator compartment can be set to between +2 °C and +8 °C.
The recommended temperature of the refrigerator compartment is 4 °C (default setting).
After you have switched on the appliance it will take several hours for the temperature to
decrease to the set temperature. Do not put food into the appliance until the temperature
has decreased to the set temperature.
Intensive cooling (SuperCool)
This appliance has an intensive cooling function. This function decreases the temperature in the
appliance as quickly as possible. This is ideal for cooling products that have just been put into
the refrigerator. Use this function when you put a large quantity of food in the appliance.
When the intensive cooling function is selected, the appliance works at maximum
capacity. It may then make more noise for a while.
1. Touch the SuperCool key.
The indicator light will come on and '2' appears in the display; the intensive cooling
▷
function is activated.
2. Touch the SuperCool key again to disable the function.
The indicator light goes off; the intensive cooling function is deactivated. The set
▷
temperature is once again shown in the display.
EN 17
Publicité
