Publicité
Les langues disponibles
Les langues disponibles
Declaration of incorporation
The illustration shows a copy of the declaration of incorporation, the original of which is issued by the
manufacturer together with this manual.
Declares under its own responsability that the Partly Completed Machinery :
Description : High pressure pump
Serial number : XXXX
Year of manufacture : XXXX
Complies with the following essential safety requirements specified in Annex I of Dir. 2006/42/CE :
1.1.2-1.1.3-1.1.5-1.3.1-1.3.2-1.3.3-1.3.4-1.5.4-1.7.1-1.7.2-1.7.4-1.7.4.1-1.7.4.2
It declares also that the relevant technical documentation has been compiled in accordance with
the part B of Annex VII and that it undertakes to transmit, in response to a reasoned request by
the national authorities, relevant information about the partly completed machinery in paper or
electronic format.
Prohibiting the put into service of the partly completed machinery until the final machinery
into which it is to be incorporated has been declared in conformity (where appropriate) with the
provisions of the 2006/42/CE Directive and subsequent amendments.
The following Harmonized Standards have been consulted for the compliance verification :
The person authorized to compile the relevant technical documentation:
Modena
20/03/2017
English
TECHNICAL INFORMATION
DECLARATION OF INCORPORATION
Directive 2006/42/EC (Annex II B) and subsequent amendments
Annovi Reverberi S.p.A.
Via Martin Luther King, 3 - 41122 – Modena – Italia
Annovi Reverberi S.p.A. Via Martin Luther King, 3 – 41122 Modena (MO) – Italia
Tel. +39 059 414 411 – Fax +39 059 253 505 – E-Mail :
The Manufacturer
EN 809: 2009
Reverberi Ing. Stefano
Managing Director
infoar@annovireverberi.it
– Web :
27
www.annovireverberi.it
2
Use and Installation
Publicité
