3
Description
The indirectly heated hot water tank, referred to below as a tank, is used for drinking water. It primarily comprises a stainless steel
storage tank. The outside wall of the storage tank is provided with permanently attached insulation to prevent heat loss.
3.1
Identification
The nameplate provides information on manufacturer, year of manufacture, part number and technical data. The nameplate is attached
to the tank.
3.2
Regulations
Concerning the installation and operation of the device, the following standards, regulations and directives have to be complied with:
•
DIN EN 806
•
DIN EN 1717: 2011-08
•
DIN 1988
•
DIN 4708
•
EN 12975
•
pr EN 12897: 2014
•
DVGW
–
Worksheet W 551
–
Worksheet W 553
•
EnEG (German energy saving act)
•
EnEV (German ordinance on energy-saving thermal protection and energy-saving plant technology for buildings)
•
2009/125/EC (Ecodesign Directive)
•
Ordinance (EU) No. 814/2013 (implementing measures)
•
Local regulations
•
VDE regulations
Storatherm — 19.03.2018
Description
English — 15