intense white light.
4. When finished using the device, turn it off by sim-
ply pressing the on/off switch.
5. Unplug the device from the socket.
user's recoMMenda-
tIons
Place the lamp between 30 and 70cm from your
eyes in the field of vision (at an angle of approxima-
tely 30° in front of your face), it is not necessary to
continually look at the lamp, pursue your activities
normally (breakfast, office work, computering,
make-up...).
For a pleasant use, without a dazzling effect, make
sure that the room is lit (especially for the first days of
use) to minimize the contrast between the lighting of
the lamp and that of the environment.
It is advised to start the light therapy sessions as
soon as you feel a lack of light, before the first symp-
toms of seasonal affective disorder (SAD) appear.
As a prevention or treatment for SAD, it is advised
to carry out sessions in the morning after waking up.
It is also advised to do one session every morning in
3-week cycles during the dark periods of the year.
These figures are to be adapted to each person de-
pending on the results after a few days of treatment.
Maximum intensity white light option:
30 cm
50 - 70 cm
30 min
45 min
Maximum intensity blue light option:
45 min
30 cm
60 min
50 cm
DAYVIA notice Slimstyle151112.indd 18-19
Generally, all people wanting to compensate their
lack of light (SAD, working in a confined room...) with
light therapy must give priority to morning exposure :
we recommend an exposure of 30 minutes to 1 hour
(see above for the distance) at maximum intensity.
Morning exposure, ideally just after waking up is
recommended for people with delayed sleep phase
syndrome (falling asleep late and difficulties waking
up in the morning) and for people preparing a trip
easterly (crossing more than 3 time zones), the ef-
fects of jet-lag will be notably minimized.
Evening light therapy is reserved for people working
at night, people with advanced sleep phase syn-
drome (waking up too early) and for people preparing
a trip westerly (crossing more than 3 time zones) to
avoid jet-lag.
After your daily light therapy session, you can use
your Dayvia Slim Style lamp all day long as a back-
up light or a desk lamp by reducing the intensity of
the white light according to your wishes.
devIce MaIntenance
Unplug the lamp and the power supply unit and leave
it to cool down before cleaning it.
Never use abrasive substances or detergents to
clean the device : use a damp cloth making sure that
no liquid penetrates into the device.
Being a LED technology, there is no maintenance
and the lifespan is over 30 000 hours.
English
18
tecHnIcal cHaracte-
rIstIcs
The characteristics are prone to modifications wit-
hout notice.
-Power supply : 21W
-Power supply input voltage (V AC) : 220-240 V
-Power supply output voltage (V DC) : 6 V
-Frequency : 50-60 Hz
-Insulation class : II
-Altitude of use < 2000m
-Temperature of use : from +10°C to +40°C
-Relative humidity level whist in use : from 30% to
75%
-Storage temperature : from -5°C to +45°C
-Over voltage category II
-Length of cords : 3.2 m
-Dimensions of the device : 34.6 x 13.7 x 9.6 (h x
w x d)
-Device weight : : 1.1 kg
-Device weight with power supply : 1.3 kg
-Class II A medical device : CE0459
At the end of numerous trials in 3 French independent
laboratories accredited COFRAC, DAYVIA slim style
is certified conform to all the guideline norms 93/42/
CEE and 2007/47/CEE applied to medical devices
in Europe :
-conforms to electrical security
-conforms to EMC (electro magnetic fields)
-conforms to photobiological risks of light : group 0
(no risk).
tHe syMbols on tHe
PoWer suPPly unI
Consult the supplied user's guide.
This device is class II.
This device must not be discarded with house-
hold wastes, take it to a waste disposal facility
where it can be recycled. By doing so, you will
contribute to the protection of the environment.
Equipment with safety insulation.
This device is certified conform to the gui-
deline regulating medical devices.
English
19
26/08/2014 09:00:13