marklin 55251 Mode D'emploi page 13

CV Discription
Multiple station announcements
Bit 0 – 3 = Number of stations
60 PoM Bit 4 = Last station reverses the sequence.
Bit 5 = Locomotive direction determines the sequence.
Bit 6 = Basic setting for sequence.
61 PoM Random sound: Interval min.
62 PoM Random sound: Interval max.
63 PoM Volume
64 PoM Threshold for brake squealing
66 PoM Reverse trim
95 PoM Forward trim
176 Minimum speed, analog DC
177 Maximum speed, analog DC
178 Minimum speed, analog AC
179 Maximum speed, analog AC
( ) Values = factory settings
DCC: programming on the programming track by means of CV programming,
programming with PoM (Program on the Main); this must be supported by the controller you are using.
* The values for the desired setting must be added!
Example: The number of speed levels 28/128 = 2 + DCC operation with a braking route = 4, results in the value = 6
Betrieb • Operation • Fonctionnement
6021 Value
—
—
—
01 - 63 (63)
—
—
—
—
—
—
—
13
DCC Value
0 – 126 (5)
0 – 255 (30)
0 – 255 (50)
0 – 255 (255)
0 – 255 (15)
0 – 255 (128)
0 – 255 (128)
1 – 255 (50)
1 – 255 (170)
1 – 255 (60)
1 – 255 (190)
Exploitatie • Operación • Operazione