Replacing Fuse; Water Leakage; Exhaust Leakage - Yamaha Motor 75A Manuel D'utilisation

GB
EMU01329

REPLACING FUSE

If the fuse has blown on an Electric start
model, open the fuse holder and replace
the fuse with a new one of proper amper-
age.
w
Be sure to use the specified fuse. An
incorrect fuse or a piece of wire may
allow excessive current flow. This could
cause electrical system damage and a fire
hazard.
NOTE:
If the new fuse blows again immediately,
q
consult a Yamaha dealer.
w
1 Fuse holder
2 Fuse (20A)
001459

WATER LEAKAGE

Start the engine and check that no water
leaks from the joints between the exhaust
cover, cylinder head and crank case.

EXHAUST LEAKAGE

Start the engine and check that no exhaust
leaks from the joints between the exhaust
cover, cylinder head and crank case.
4-15