Atag VA63111LT Notice D'utilisation page 24

24
• The correct quantity of detergent is used.
• There is dishwasher salt and rinse aid
(unless you use combi detergent tablets).
CARE AND CLEANING
Warning! Before maintenance,
deactivate the appliance and
disconnect the mains plug from the
mains socket.
Cleaning the filters
C
B
Cleaning the spray arms
Do not remove the spray arms.
If the holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
External cleaning
Clean the appliance with a moist soft cloth.
• The cap of the salt container is tight.
1. Turn the filter (A) counterclockwise and
C
A
2. To disassemble the filter (A), pull apart
3. Remove the filter (B).
A1
4. Wash the filters with water.
5. Before you put the filter (B) back, make
A2
6. Make sure that the filter (B) is correctly
7. Assemble the filter (A) and put it back
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.
Internal cleaning
If you regularly use short duration pro-
grammes, these can leave deposits of
grease and limescale inside the appliance.
Dirty filters and clogged spray arms de-
crease the washing results.
Make a check regularly and, if neces-
sary, clean them.
remove it.
(A1) and (A2).
sure that there are no residues of food
or soil in or around the edge of the
sump.
positioned under the 2 guides (C).
in filter (B). Turn it clockwise until it
locks.
An incorrect position of the filters can
cause bad washing results and dam-
age to the appliance.