Henco LOGIC Mode D'emploi page 12

English
7. USER PARAMETERS
7.1 Access to user parameter menu
Boost, comfort, reduced, antifreeze,
or stand-by menus
10 seconds without
user action
Press any key to wake-up the thermostat and
activates the backlight.
By pressing key
access to parameter menu.
The menu scroll is done with keys
. Menu is selected by pressing key
value starts blinking. Once in the menu, the
parameter value is changed with the keys
and .
Pressing again key
value.
Note: Thermostat parameters are divid- ed
into two groups: user and installer (advanced
menu).
12
| |
Nederlands Français
Automatic return (10 seconds of keyboard inactivity)
Screensaver
during 5 seconds, user can
sets the parameter
|
Deutsch
Mode selection menu
2 seconds
and
,
Parameter menu
5 seconds