Henco LOGIC Mode D'emploi page 11

6.2 Opened windows detection
Enter user parameter 06.
When activated and a detection is running,
the icon will appear and blink on the
screen!; This function is done by measuring
and recording the temperature evolution.
When an opened window is detected, the
thermostat applies to heating system anti-
freeze temperature set point. User can restart
heating system, and stops window detection
by pressing on a key.
6.3 Keyboard locking
Wake-up the thermostat (lighted back- light),
Press and hold and
ously.
Once locking is activated, logo
the LCD screen:
Deutsch
6.4 PIN code
To activate this function enter user parameter
9.
The PIN code protect the thermostat from any
change of the setting as temperature or mode.
When user pushes a key, "PIN" will be dis-
played. If user press another time a touch, he
has to enter PIN number.
6.5 Heating and cooling
Logos used to indicate than system
requires:
heating is
6.6 LED indication
When user modify set point temperature in
functioning mode, behavior information is dis-
keys simultane-
played with a LED RGB located on the middle
of validation key.
appears on
| | |
Français Nederlands English
indications
; cooling is
Temperature
T ≤ 18°C
18°C < T ≤ 20°C
20°C < T ≤ 22°C
22°C < T ≤ 24°C
T ≥ 24°C
.
LED color
blue
azure
green
orange
red
11