Henco LOGIC Mode D'emploi page 10

English
6. FUNCTIONS HIGHLIGHTS
6.1 Reversible mode
Reversible menu access
Enter user parameter 07, use keys
, to select operating mode of the thermostat:
- Hot : Heating regulation mode
- CLd : Cooling regulation mode
- rEv: activation of reversible mode in menu
- Aut : automatic Heat/Cool mode.
Pressing key
switches to comfort mode.
A user inactivity of some seconds confirms
cur- rent selection and returns to old selected
mode.
By pressing
value is validated.
Heating mode
automatic
return
Back to previous mode
10
| |
Nederlands Français
and
confirms the selection and
key, temperature set point
Reversible menu
Cooling mode
Navigation menu
|
Deutsch
Once the reversible mode has been selected,
the change of mode is made as follows:
Press 2s on
selection menu. Then go down below the
OFF mode until the 4 blank icons are dis-
played:
Select with
mode or «Cld cooling mode using
keys.
Pressing the
selection.
User inactivity of a few seconds keeps the
thermostat in the previous mode.
Auto H&C mode
1 second
Comfort or Eco mode
to access the menu mode
then select the «Hot» heating
key for 1s confirms the mode
Short push
and
or