CEVIK PRO MINI 125 Manuel De L'utilisateur page 25

EN
USE AND MAINTENANCE OF THE MACHINE.
 Use jaws or some other practical way to secure and sustain the work piece to a stable platform.
Holding the work piece with your hands or against your body is unstable and can lead to loss of
control.
 Do not force the machine. Use the machine following the specifications. That way, the machine will
perform better and more safely the work for which it was designed.
 Do not use the machine if the switch (7) does not turn on or off. Any machine that cannot be
controlled with the on/off switch is dangerous and must be repaired.
 Disconnect the plug from the power source before making any adjustments, changing accessories
or storing the machine. These preventive measures reduce the risk of the machine turning on
accidentally.
 Store electrical machines out of the reach of children and anyone else who is not trained for its
operation. The tools are dangerous in the hands of users who are not properly trained.
 Always keep the machine in good condition. Machines properly maintained are less likely to suffer
breakdowns or cause accidents.
 Check for misalignment or jamming of moving parts, broken parts, or any other anomaly before use.
Many accidents are caused by machines with poor maintenance.
 Use only accessories recommended by the manufacturer of your model. Accessories that work for a
specific machine can be dangerous when used with another.
 Do not alter or misuse the machine. This machine was built with accuracy. Any alteration or
modification not specified is a misuse and can lead to dangerous situations.
 The use of an appropriate safety device, such as a thermal and differential switch, is recommended
when using electrical equipment.
REPAIR.
 The repair of the machine must be carried out only by qualified staff. Repair or maintenance
performed by an unqualified person can lead to risk of injury.
 Only the spare parts or accessories recommended by the manufacturer should be used for the
maintenance of the machine. Follow the instructions in the maintenance section of this manual.
The use of unauthorized parts or failure to follow maintenance instructions may result in the risk of
electric shock or injury.
4. SPECIFIC SAFETY RULES FOR WELDING MACHINES.
THERMAL PROTECTION.
The equipment is protected against thermal overloads via an automatic recharge thermostat. When the
set maximum temperature is reached, the protection will cut off the power circuit current and the
warning light will light up (3). DO NOT TURN OFF OR DISCONNECT THE EQUIPMENT WHILE THE
THERMAL PROTECTION IS ACTIVE, AS DOING SO MAY CAUSE SERIOUS DAMAGE TO THE MACHINE.
After a few minutes, the warning light will go out and the power will come back. The equipment will
then be ready to resume operation.
CAUTION: Use the equipment only following the procedure provided in this manual. Misuse can
be dangerous for people, animals and things.
The user of the welder is responsible for his own safety and that of others: it is key to read, understand
and align with the basic rules contained in this manual. Make sure that the current absorption and the
protection of the electric line correspond to those of the machine and the outlet.
25