Publicité
Les langues disponibles
Les langues disponibles
Operational Instructions
● When the oven is first plugged in, a beep will sound and the display will show "1:01" and "CLOCK".
● In the process of setting a cooking mode, if the start button is not pushed within 30 seconds, the control panel will
reset to standby mode and display the clock.
● During cooking, press the STOP/CANCEL button once, or open and close the oven door once, to pause the program.
Press the START/+30 SEC. button to resume. Press the STOP/CANCEL button twice to cancel the program.
●
After cooking ends, the display will show "End" and beep will sound every two minutes until user presses STOP/
CANCEL button or opens the door.
● During operation, if a valid function is selected, the microwave will beep once. If an invalid function is selected, the
microwave will beep twice.
Deactivating and Reactivating the Electromagnetic Safety Lock
The electromagnetic safety lock will be enabled when the microwave oven is first plugged in.
To deactivate the electromagnetic safety lock:
1. When in standby mode and the electromagnetic lock is activated, press and hold UNLOCK
the display will show "Loc", indicating the safety lock is currently activated.
2. Press number buttons "7" and "9" in sequence, the display will show "ULoc", indicating the lock has been deactivated.
3. After 1 second, the system will return to the standby mode, and the electromagnetic function will be disabled.
Note: When the electromagnetic lock function is deactivated, the door can be opened and closed without having to
first press the UNLOCK
To reactivate the electromagnetic safety lock after deactivating:
1. When in standby mode and the electromagnetic lock is deactivated, press and hold UNLOCK
the display will show "ULoc", indicated the safety lock is currently deactivated.
2. Press the number buttons "7" and "9" in sequence, the display will show "Loc", indicating the safety lock is currently
activated. After 1 second, the system will return to standby mode, and then turn on the electromagnetic lock function.
NOTE:
● If setting the electromagnetic lock is not completed within 10 seconds, the setting is unsuccessful and the system
will return to standby mode.
● Any loss of power due to power outage, powering down, or unplugging the unit will not cause the electromagnetic
safety lock to reset. When power is restored, the most recent safety lock setting prior to loss of power will
automatically re-engage (e.g., if the electromagnetic safety lock was deactivated prior to power loss, it will not have
to be deactivated again upon power restore).
Electromagnetic Safety Lock Functions
When the electromagnetic safety lock is activated, the microwave will function differently.
1. In standby mode:
● The oven door can be opened and closed normally.
2. During cooking:
● During cooking, user cannot directly open the door. To open the door, utilize one of the following methods:
● Press UNLOCK
within 10 seconds, the electromagnetic lock will automatically re-engage. If the door is not opened for 30
minutes, the electromagnetic lock will unlock automatically.
● Press STOP/CANCEL button once to pause cooking and unlock the electromagnetic lock. If the door is not
opened within 10 seconds, the electromagnetic lock will automatically lock again. If the door is not opened for
30 minutes, the electromagnetic lock will unlock automatically.
● Press UNLOCK
door is closed.
button.
button once to unlock the electromagnetic lock and pause cooking. If the door is not opened
button, then open the door. The electromagnetic lock will automatically lock again when the
- 10 -
button for 2 seconds,
button for 2 seconds,
CCD-0008963 Rev: 07-02-24
Publicité
