Home Decorators Collection 11252AIWNCNCA Guide D'utilisation Et D'entretien page 7

Assembly — Hanging the Fan
1
Attaching the mounting bracket to
the electrical box
WARNING: To reduce the risk of fire, electric shock, or
other personal injury, mount the fan only to an outlet box or
supporting system marked acceptable for fan support and
use the mounting screws provided with the outlet box.
□ Secure the mounting bracket
with the screws and washers provided with your outlet
box.
(C) to the ceiling outlet box
C
2
Attaching the downrod to the
fan motor assembly
□ Loosen the two
(MM) from the fan motor assembly (J) coupling.
□ Remove the hitch pin (JJ) and lock pin (KK) from the
downrod (G). Remove the hanger ball (F) from the
downrod (G) by loosening the hanger ball set screw
(LL), and removing the cross pin (II), then sliding
the hanger ball (F) off of the downrod (G).
Carefully feed the fan wires and safety cable (I) up
□
through the downrod (G). Thread the downrod (G) into the
fan motor assembly (J) coupling. Line up the holes and
replace the lock pin (KK) and the hitch pin (JJ). Tighten
the set screws (MM).
I
F
G
KK
7
Please contact 1-844-400-FANS (3267) for further assistance.
fan motor assembly coupling set screws
HOMEDEPOT.CA
II
LL
JJ
MM
J