Design And Function; Scope Of Delivery; Transport, Packaging And Storage - WIKA TC90 Mode D'emploi

4. Design and function / 5. Transport, packaging and storage

4. Design and function

4.1 Description
The high-pressure thermocouple model TC90 is suitable for the highest process
requirements and can be used for reliable temperature measurement, e.g., in plastics
GB
production and processing applications.
The TC90 is designed and manufactured according to individual customer specifications.
These instruments are manufactured using special manufacturing processes and, in order
to ensure their quality, special test arrangements and material tests are applied.
This measuring assembly is sealed by means of metal-to-metal sealing, high-pressure
threaded connectors or sealing lenses, which have both proven to be ideally suited to
highest-pressure applications over many years.
All high-pressure thermocouples TC90 are pressure tested by means of static pressure.
The pressure level depends on the maximum design pressure and is defined together with
the user.

4.2 Scope of delivery

Cross-check scope of delivery with delivery note.

5. Transport, packaging and storage

5.1 Transport
Check the instrument for any damage that may have been caused by transport.
Obvious damage must be reported immediately.
5.2 Packaging
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change in
installation site, sending for repair).
5.3 Storage
CAUTION!
Protect the metallic sealing faces of the sealing cone and lens-type sealing ring
as well as temperature sensors (e.g. sensors, neck tube, cable ...) from damage.
8
WIKA operating instructions model TC90