Publicité
Les langues disponibles
Les langues disponibles
To prevent the switch trigger from being accidentally
pulled, a lock-off lever is provided. To start the tool,
depress the lock-off lever and pull the switch trigger.
Release the switch trigger to stop.
1
Fig.10
► 1. Lock-off lever 2. Switch trigger
Speed adjusting
You can adjust the tool speed using the adjusting lever.
To adjust the tool speed, move the lever while depress-
ing the lock-off lever and pulling the switch trigger.
To increase the speed, move the lever downward. To
decrease the speed, move the lever upward. When the
adjusting lever is in the uppermost position, the tool
stops.
1
Fig.11
► 1. Adjusting lever
Reverse button for debris removal
WARNING:
the battery cartridge before you remove entan-
gled weeds or debris which the reverse rotation
function can not remove. Failure to switch off and
2
remove the battery cartridge may result in serious
personal injury from accidental start-up.
This tool has a reverse button to change the direction of rotation.
It is only for removing weeds and debris entangled in the tool.
To reverse the rotation, press the reverse / high-torque but-
ton when the cutting tool is stopped. The cutting tool rotates
in reverse direction and the reverse lamp blinks when you
pull the switch trigger while depressing the lock-off lever.
To return to regular rotation, release the trigger and wait
until the cutting tool stops.
Fig.12
► 1. Reverse lamp 2. Reverse / high-torque button
NOTE: During the reverse rotation, the tool operates only
for a short period of time and then automatically stops.
NOTE: Once the tool is stopped, the rotation returns
to regular direction when you start the tool again.
NOTE: If you press the reverse / high-torque button
while the cutting tool is still rotating, the tool comes to
stop and to be ready for reverse rotation.
High-torque button
You can use the tool in the high-torque mode. In the high-
torque mode, the tool speed is less likely to decrease than
in the normal mode when the load of the tool is large.
To use the tool in the high-torque mode, press and hold the reverse
/ high-torque button. The high-torque lamp lights up. To return to the
normal mode, press and hold the reverse / high-torque button again.
Fig.13
► 1. High-torque lamp 2. Reverse / high-torque button
14 ENGLISH
Switch off the tool and remove
1
2
1
2
Publicité
