Publicité
Les langues disponibles
Les langues disponibles
S T E P 2
I n s t a l l t h e C o u n t e r t o p S i n k . P r o f e s s i o n a l I n s t a l l a t i o n
r e c o m m e n d e d .
1. With your vanity base in place, level and secured to the wall correctly, and your
plumbing routed, it's time to install your counter and sink.
2. With clean hands to prevent any smudging of top, 2 adults must carefully
unpack the countertop packaging. The sinks come pre-attached to the counter
and do not need any adjustment.
3 Prior to installing the top, apply a small bead of silicone on the top rail of the
wood vanity base.
4. With an adult on either end of the vanity top, carefully lift the top out of box and
place into position on the vanity base, centering the top onto the unit, checking for
the same overhang on each side of the base.
5. If you have a Backsplash, it can be installed at this time. Important: Backsplash is
very fragile. Assembly should be done with two people.
6. Clean up any silicone residue quickly with mineral spirits and a microfiber towel.
Allow silicone sealant to fully dry for 24 hours.
7. Install the included overflow ring (see plastic bag) into the sink overflow
1 (833) 66 BEMMA
customercare@bemmadesign.com
Publicité
