Publicité
Les langues disponibles
Les langues disponibles
5. Fill the stitched-on sandbags (1a)
with sand to give the product
additional support.
Taking down
Watch the information
video dealing with
folding the product up
by scanning the QR
code with an appropriate device.
1. Empty the stitched-on sandbags
(1a).
2. Remove the pegs (3) from the
ground.
3. Grip the centre points of the
upper loops in one hand and
pull the centre points of the lower
loops towards them (figs. B-C)
Note: Start at the back end of the
product so that the air can escape
from the front through the entrance.
4. Hold the product up on its edge
while holding all four loops in one
hand (fig. C).
5. Press the top of the upper bow
down towards the ground while
holding the lower bow in place
with your foot and turn them
towards the centre (fig. E).
6. Press both newly formed loops
inwards (fig. F).
7. Loosen your grip with the hand
that is holding together the four
loops and push all bows together
(fig. G).
8. Fasten the rubber band around
the product and store it in the
carrying bag (4) (fig. G).
Storage, cleaning
Allow all parts to dry thoroughly
before you pack the product away
again. This prevents mould, odour,
and discolouring. When not in use,
always store the product clean and
dry at room temperature. Incorrect
storage of the product brings the risk
of mould formation. Wipe clean with
a damp cloth only and wipe dry
afterwards.
IMPORTANT! Never clean the prod-
uct with harsh cleaning agents.
Clean the pegs and store them in
the bag supplied. Do not store them
in the beach shelter itself.
Disposal
Dispose of the article and the
packaging materials in accordance
with current local regulations. Pa-
ckaging materials such as foil bags
are not suitable to be given to child-
ren. Keep the packaging materials
out of the reach of children.
Dispose of the products and
the packaging in an environ-
mentally friendly manner.
GB
23
Publicité
