Publicité
Les langues disponibles
Les langues disponibles
CAUTION
IF THE BATTERY DOES NOT FIT EASILY INTO
THE BATTERY HOLDER, IT MAY NOT BE
INSTALLED CORRECTLY, WHICH CAN CAUSE
DAMAGE TO THE BATTERY AND/OR THE
PRODUCT.
3.
Make sure that the battery is installed securely.
5.1.5
START THE PRODUCT
1.
Simultaneously push the safety-lock button (1)
and pull the trigger (2).
1
2.
Adjust the speed according to the grass condition
by sliding the speed switch.
English
5.2
5.2.1
When the cutting line becomes short during operation,
bump the trimmer head on a hard, flat surface to
extend more cutting line out. It is recommended to
operate the product on high-speed mode for dense
work areas.
This trimmer is equipped with a string cut-off blade
on the trimmer guard. The string cut-off blade
continuously trims the line to ensure a consistent
and efficient cutting diameter. This will maintain best
performance and keep line long enough to advance
properly.
5.2.2
Note: The cutting diameter of the product is set to 16
in. (40.6 cm), but it can be modified to 14 in. (35.6
cm) for longer runtime or kept at 16 in. (40.6 cm) for a
2
larger cutting area.
1.
2.
3.
4.
9
OPERATE THE PRODUCT
ADJUST THE LENGTH OF THE CUTTING
LINE
ADJUST THE CUTTING DIAMETER
First, start by removing the battery.
Unscrew the blade screws securing the string cut-
off blade with the hex key.
Turn the string cut-off blade 180°.
Securely tighten the blade screws.
EN
Publicité
