Textron Jacobsen G-Plex III Mode D'emploi page 42

9 LUBRICATION & MAINTENANCE
9.10 ENGINE OIL LEVEL - DIESEL
Damage to engines due to improper maintenance
or use of incorrect oil quality and/or viscosity is not
covered by the engine warranty (refer to the engine
operator's manual for crankcase capacity and
recommended oil grade and weight).
Unit must be on a level surface to obtain an
accurate oil level reading.
The oil level must be kept between the two marks on
the dipstick.
NOTICE
• DO NOT overfill. Engine overheating and
damage may result.
• DO NOT use a wrench when installing the
filter, use hand pressure ONLY.
ENGINE OIL FILTER
When replacing the oil filter, apply a light film of
clean oil to the rubber seal. screw filter on until the
seal contacts the crankcase, then tighten 1/2 turn
more.
en-42
JACOBSEN G-PLEX III Series: FH & FJ
SAFETY AND OPERATORS MANUAL
1. Dipstick
1. Oil Filler Port
1
1