Textron Jacobsen G-Plex III Mode D'emploi page 22

6 CONTROLS
6.5 PADDLE/FOOTSWITCH MOW/LIFT
The Mow/Lift Paddle/Footswitch lowers and raises
the cutting heads.
To Lower the Heads: Depress the footswitch or
operate the paddle. If reel enable switch is on, reel
rotation starts when the heads are lowered.
To Raise the Heads: Depress the footswitch or
operate the paddle. Reel rotation stops when the
heads are raised.
6.6 JOYSTICK MOW/LIFT
The Mow/Lift Joystick lowers and raises the cutting
heads.
To Lower the Heads: Move the joystick forwards
(A) to lower the cutting heads. If reel enable switch
is on, reel rotation starts when the heads are
lowered.
To Raise the Heads: Move the joystick backwards
(B) to raise the cutting heads. Reel rotation stops
when the heads are raised.
en-22
JACOBSEN G-PLEX III Series: FH & FJ
SAFETY AND OPERATORS MANUAL
1. Paddle Control (Mow/Raise)
2. Footswitch Control (Mow/Raise)
3. Illustration of Paddle/Footswitch Operation