Publicité
Les langues disponibles
Les langues disponibles
Intensive cooling/freezing (SuperCool/FastFreeze)
This appliance has an intensive cooling/freezing function. This function decreases the temperatures
in the refrigeration compartment and freezer compartment as quickly as possible. Activate this
function 24 hours before you put a large quantity of fresh food in the appliance.
When the intensive cooling/freezing function is selected, the appliance works at maximum capacity.
It may then make more noise for a while.
INFORMATION!
Adjusting the temperature of the refrigeration compartment while the intensive cooling/freezing
function is activated will immediately disable the intensive cooling/freezing function.
INFORMATION!
When the intensive cooling/freezing function is not manually disabled then the function will be
automatically disabled after about two days. The temperature then returns to the latest temperature
setting.
•
Adjust the temperature as desired using the A key.
•
Press the A key (several times) until the desired temperature
indicator lights up.
•
When the A key is pressed for the first time, the currently set value
or function will start to flash. Every successive time you press the
A key, the settings indicator will move to the next setting (from right
to left, in a circular manner).
•
After three seconds, the setting will stop flashing. Your setting will
be stored and the corresponding indicator will be continuously lit.
The numbers 2, 4, 6 and 8 indicate the degrees Celsius (°C) in the
refrigerator compartment.
•
The recommended temperature setting is +4 °C. At this temperature,
food quality and freshness are preserved longer.
•
The temperature in the refrigerator compartment also affects the
temperature in the freezer compartment. For a lower temperature
in the freezer compartment, set a lower temperature in the
refrigerator compartment.
•
If the ambient temperature in the room where the appliance is
installed is below 16 °C, we recommend setting a temperature lower
than 4 °C.
•
To activate the intensive cooling/freezing function, press the A key
several times until symbol C lights up.
•
To switch off the intensive cooling/freezing function, press the A
key to select the desired temperature B.
Operating the appliance
19
Publicité
