Atag KS36178D Manuel D'utilisation page 111

Glass shelves
Bottle rack *
Vegetables drawer with manual humidity control
The drawer at the bottom of the refrigerator is intended for storing fruit and vegetables. It provides
humidity and prevents the food from drying out. The drawer has a humidity regulator which allows
setting the humidity level.
Description of the appliance
The shelves are made from safety glass. To change the height of a
shelf, lift the front of the shelf (1). Take hold of the back and pull the
shelf slightly forwards (2). Move the shelf to a higher or lower position
(3).
To remove a shelf from the refrigerator, lift the front of the shelf (4). Take
hold of the back and pull the shelf out of the appliance (5).
The bottle rack can contain a maximum load of nine 0.75-litre bottles
or 13 kilograms of total weight. Also cans can be put on the bottle rack
(lengthwise or crosswise). Make sure that the door can close correctly
if you have put bottles or cans on the rack.
The bottle rack cannot accidentally be pulled out. It can only be pulled
out when it is empty. To pull it out, lift it slightly at the front (1) and pull
it towards you (2).
Slider position to the right: closed vents, higher humidity in the drawer
Slider position to the left: open vents, lower humidity in the drawer
INFORMATION!
If you observe droplets accumulating below the glass shelf, open
the vents and wipe the shelf.
15