Yardistry YM11755 Instructions D'installation Et D'utilisation page 9

Step 1: Inventory Parts - Read This Before Starting Assembly
STOP
T his is the time for you to inventory all your hardware, wood and accessories,
A.
referencing the parts identification sheets. This will assist you with your assembly.
• E ach step indicates which bolts and/or screws you will need for assembly, as well as
any flat washers, lock washers, t-nuts or lock nuts.
I f there are any missing or damaged pieces or you need assistance with
B.
assembly please contact the consumer relations department directly. Call us
before going back to the store.
R ead the assembly manual completely, paying special attention to ANSI warnings;
C.
notes; and safety/maintenance information on pages 1 - 4.
F ollow the instructions in order.
•
T his structure is designed to be assembled and installed ideally by two people,
•
DO NOT attempt to install alone.
• C onsider the slope of elevation where you plan to install the structure. Also, check for
gas, telephone, other utilities or sprinkler line locations prior to excavating any holes.
B efore you discard your cartons fill out the form below.
D.
• T he carton I.D. stamp is located on the end of each carton.
• P lease retain this information for future reference. You will need this information if you
contact the Consumer Relations Department.
STOP
1-888-509-4382
support@yardistrystructures.com
PRODUCT NUMBER: YM11755
CARTON I.D. STAMP: __ __ __ __ __ ___ (Box 1)
CARTON I.D. STAMP: __ __ __ __ __ ___ (Box 2)
CARTON I.D. STAMP: __ __ __ __ __ ___ (Box 3)
STOP
9
STOP
support@yardistrystructures.com