M-system MF-64 Mode D'emploi page 186

INSIDE OF OVEN
This must be cleaned regularly.
Remove and refit the side runner frames
as described on the next chapter.
With the oven warm, wipe the inside
walls with a cloth soaked in very hot
soapy water or another suitable
product.
The bottom of the oven, side runner
frames, tray and rack can be removed
and washed.
OVEN FITTING OUT
– Hang up the wire racks on the oven
walls (fig. 6.6)
– Slide the tray and rack into the runners
(Fig. 6.7).
The rack must be fitted so that the
safety catch, which stops it sliding out,
faces the inside of the oven (fig. 6.7).
– To dismantle, operate in reverse
order.
OVEN TRAY
The oven tray must be correctly placed
on the wire shelf (fig. 6.9) then inserted
into the side runners (fig. 6.8).
Fig. 6.8
186
Fig. 6.7
Fig. 6.6
Fig. 6.9