Opale-Paramodels Pilote Ben Manuel D'utilisation page 15

Fix the silent bloc M3 10-12 with 1 x M3x8 screw as
shown on the picture.
Do the same operation on the other leg.
Assemble the upper leg with a silent bloc and 1 x
M3x8 screw.
Do the same operation on the other leg.
Mount the base on the side plates with 4 x CHC
M3x16 screws, whashers and nuts.
OPTIONAL:
It is possible to use a speedbar system with this pilot.
In this case you will have to use 2 x 4kg.cm servomo-
tors.
Insert the servomotor in the upper leg as shown on
the picture and secure it with 2 x CHC M3-8 screw and
2 x M3 nuts.
Attach the 2 legs on the silent blocs with 2 x CHC M4-
12 screws. Tighten firmly in order to get the legs into a
seated position.
O p a l e - P a r a m o d e l s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
contact@opale-paramodels.com +33(0)981 144 387
15