Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Make sure the cutting head isn't at startup and during work in contact with foreign objects.
Work only with trimmer head! Never use metal or saw discs.
Danger of injure.
SAFETY WARNINGS
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
The machine shall always be used in accordance with the manufacturer's instructions laid
down in the instruction handbook.
The manufacturer will not be liable in cases of inappropriate use or modifications of the
appliance. Also, follow the safety advice, the installation and operation manual and also to
the valid accident prevention regulations.
Appliances with incorrect or missing parts or without a security case are not to be operated.
The service centre provides you with information concerning replacement parts.
Training
a)
Read the instruction carefully. Be familiar with the controls and proper use of the
equipment.
b)
Never allow children or people unfamiliar with these instructions to use the machine.
c)
National regulations can restrict the use of the machine.
d)
Never work while people, especially children, or pets are nearby.
e)
Keep in mind that the operator or user is responsible for accidents or hazards occurring to
other people or their property.
f)
Major repair work shall be carried out only by specifically trained personnel.
g)
All persons and animals must be kept at least 15 meters from the machine while it is
working
Preparation
a)
WARNING-Petrol is highly flammable:
store fuel in containers specifically designed for this purpose;
-
refuel outdoors only and do not smoke while refueling;
-
add fuel before starting the engine. Never remove the cap of fuel tank or add petrol while
-
the engine is running or when the engine is hot;
if petrol is spilled, do not attempt to start the engine but move the machine away from the
-
area of spillage and avoid creating any source of ignition until petrol vapors have
dissipated;
replace all fuel tank and container caps securely.
-
b)
The brush cutter is fitted with a four-stroke engine, lubricating oil is needed before starting
the machine.
22
Publicité
Table des Matières
