Publicité
Les langues disponibles
Les langues disponibles
Place the fan on a flat, stable surface. Clean the exterior of the fan using a slightly damp cloth and then wipe it with a dry cloth.
The fan is ready for use.
3
using the fan
The range of the remote control is approx. 5 metres at an angle of 30° in front of the fan.
Insert the two supplied AAA 1.5 Volt batteries in the remote control, as indicated in the drawing.
Do take the plus and minus symbols on the inside of the remote control into account.
The remote control has the same function keys as the fan's control panel.
speed
Place the fan on a flat, stable surface. Insert the plug in a wall socket.
Turning the fan on and off
Press the ON / OFF [ AAN / UIT ] key to switch on the fan. By pressing the key once more, you switch off the appliance.
Setting the speed
With every press on the SPEED [ SNELHEID ] key you change the speed of the fan:
low
medium
high
Setting the timer
Press the TIMER key to start the timer. The time period is increased in steps of 1 hour when you repeatedly press this key, up to a
maximum of 7 hours.
For example, if you want to set the fan to 5 hours, press this button until the two indicator leds light up, 1u + 4u = 5 hours. The fan will
switch off when the entire programme has been completed.
If you want to stop the timer function or set a new time, you must continue to press the TIMER key until all indicator leds are off.
Oscillation
This fan is able to oscillate (swerve to the left and right) for a better air displacement.
If you want to change the wind to an upward or downward direction, you can simply move the fan head upwards or downwards.
on/off
timer
batteries
13
English
•
Publicité
