DIPRA SPID'O VCD-400-P2 Mode D'emploi D'origine page 13

FEATURES / DETAILS
Pressure port
1
Pump foot
2
Floating switch
3
Cable of floating switch
4
Cable duct of floating switch
5
Carry handle
6
Suction port
7
Pressure line
8
Connexion port
9
HA : Suction head.
HI : Difference between surface of the liquid to be pumped and
entrance of the suction line (min 0,3 m).
A : Cut-in level.
B : Cut-out level.
C : Minimum suction level.
Please read through these operating instructions
carefully to make sure that you can fully benefit from
all features. Some explanatory illustrations can be
found at the end of these operating instructions. We
hope you will enjoy your new device!
TABLE OF CONTENTS
1. General safety information
2. Range of use
3. Technical Data
4. Scope of delivery
5. Installation
6. Electrical connection
7. Putting into operation
8. Maintenance and troubleshooting
9. Warranty
10. How to order spare parts
11. Service
GB