Publicité
Les langues disponibles
Les langues disponibles
DESCRIPTION OF THE DEVICE
1
2
GB
3
4
5
6
1. Freezer Shelf
2. Air regulating rod
3. Refrigerator Glass Shelves
4. Crisper Cover
5. Salad Crisper
NOTE: The appliance design is subject to change without prior
notice�
50
7
8
9
Adjustable Feet
6�
Bottle Racks Light
7�
8�
Little Bottle Racks
Bottom Bottle Racks
9.
INSTALLATION
Position the appliance and allow it to stand for two to three
hours before it is turned on for the first time to allow the System
to settle� Do not position next to any heat source e�g� cooker,
boiler or in direct sunlight etc�
Allow at least 10cm of space at the top and 10 cm of space
on both sides of the appliance and between the back of the
appliance and the wall for enough air circulation � The appliance
is not designed for recessed installation ("building in")�
Install on a good firm level surface, and any unevenness of the
floor should be corrected prior to installation, slight unevenness
can be overcome by adjusting the front feet�
NOTE: If the appliance is positioned on a carpet, soft floor
covering you should readjust the front feet once the appliance
has had time to settle�
Heat dissipation space
When working, the refrigerator gives off heat to surroundings.
Therefore, at least 30mm of free space should be spared at the
top side, more than 100mm on both sides, and above 50mm at
the back side of the refrigerator.
Dimensions in mm:
W
D
H
A
703
703
1855
1147
Note: Figure 1, Figure 2 only illustrate the space demand of the product.
B
C(°)
E
F
1359
130±5
50
100
GB
51
Publicité
