Publicité
Les langues disponibles
Les langues disponibles
2 . Loosen the three screws under the rotary knob using a suitable screwdriver
(not included in the scope of delivery) (figure E) .
Remove the base and take the battery compartment out .
Carefully remove the empty battery from the battery holder (figure F) .
3 . Exchange it for a new battery .
Note: Pay attention to the plus and minus poles on the battery and that it is
inserted correctly . The battery must be fitted entirely inside the battery holder .
4 . Replace the battery holder in the rotary knob . Replace the base and tight-
en the three screws . Place the thread wheel on the rotary knob as shown .
Please ensure that the three pins on the rotary knob are positioned in the
slots on the thread wheel (figure G) .
Insert the rotary knob back on the size adjustment system .
Important: When you insert the rotary knob please ensure that the size
adjustment system is set to a medium size as it is not possible to re-attach the
rotary knob otherwise (figure G) .
Switching the light on and off (figure A)
Different light settings are available to you if you press on the on and off
button (4):
Press 1x: LEDs flash in alternation
Press 2x: LEDs flash simultaneously
Press 3x: LEDs all turn on
Press 4x: LEDs all turn off
HeiQ Pure
44
GB
Textile freshness
Experience the feeling of lasting freshness through the
power of silver, keeping you odour-free all day lang .
Publicité
