Publicité
Les langues disponibles
Les langues disponibles
• The protective effect of the helmet can be seriously impaired by the effects
of paints, stickers, cleaning fluids, or other solvents .
• The helmet should protect your head in the event of an impact . This pro-
tection is no longer provided even after a single impact (even if it is light) .
Therefore the helmet must be replaced immediately after an accident even
if there is no visible damage .
• Never use solvents or scouring agents that contain petroleum to clean the
helmet, either on the outside or the inside . Always use a detergent that is
pH neutral and diluted with clear water; rub the article carefully with a soft
cloth . Then wipe it dry with a lint-free cloth . The padding can be cleaned
with a little soap and a soft brush .
• Only use original replacement parts for your helmet .
• The LED light is not a safety aid and on no account replaces the specific
devices that are compulsory in accordance with traffic regulations .
• The lifespan of the article depends on its use . However the article must be re-
placed five years after the date of manufacture (version: 11/2022) at the latest .
• The light source for this lighting fixture is not replaceable; when the light
source has reached the end of its service life, the entire lighting fixture must
be replaced .
Warnings on batteries!
• Remove the batteries if they are empty or if the product is not going to be
used for an extended period .
• Do not use different battery types or brands, new and used batteries in
combination, or batteries with different capacities, as they leak and can
thus cause damage .
• Observe the polarity (+/–) when inserting batteries .
• Change all batteries at the same time and dispose of the old batteries
properly .
42
GB
Publicité
