Publicité
Les langues disponibles
Les langues disponibles
• Please observe all the safety rules given below at all times.
• Disconnect from the mains: Ensure that the output power circuit
is free of voltage.
• Secure against switching on again: Ensure that no one acciden-
tally switches on the power again. Mask the fuse so as to prevent
an accidental switching-on again!
• Ensure that there is no voltage: Using a measuring device or a
voltage tester (phase tester), verify that the circuit has no power.
4. Installation
Take the device out of the package and remove all packaging material. Deactivate
the fuse of the power circuit at the place where you want to connect the spot-
light.
1.
Make a hole with the required diameter at the respective location.
2.
Connect the recessed spotlight directly to the mains. You will require a
transformer for this purpose.
3.
Press the clips of the spotlight upwards and insert it into the drilled hole.
English
7
Publicité
