Intended Use; Universal Cutter - Siemens MQ964 Serie Mode D'emploi

Intended use

This accessory is designed for the hand mixer MQ964.. .
Follow the operating instructions for the hand mixer.
Do not attach or remove the hand mixer until the appliance is at a
standstill. The accessory is suitable only for the use described in
these instructions.
Safety information
W Risk of injury from sharp blades!
Never grip the blade in the universal cutter. Take hold of the univer-
sal cutter blade by the plastic handle only. Do not touch the blade of
the universal cutter with bare hands. Clean with a brush. The univer-
sal cutter must be completely assembled before use!
W Important!
Never use the quick blender in the universal cutter container. The
universal cutter is not microwave-safe. Do not fit or remove the
attachment for the universal cutter until the appliance has come to
a standstill. Never immerse the attachment of the universal cutter in
liquids and do not clean under running water or in the dishwasher.
W Risk of harm to health!
Soiling on surfaces may be harmful to health. Follow the cleaning
instructions. Clean surfaces which come into contact with food
before each use.
Before use, read these instructions
carefully in order to become familiar with
important safety and operating instruc-
tions for this appliance. Please keep the
operating instructions in a safe place.
If passing on the appliance to a third party,
always include the operating instructions.

Universal cutter

X Fig. A
1 Container
2 Blade
3 Gear attachment
4 Lid
Operation
Warning!
Always observe the maximum quantities
and processing times in the table. X Fig. C
The universal cutter is suitable for cutting
up meat, hard cheese, onions, herbs, garlic,
fruit, vegetables, nuts and almonds.
Warning!
– The universal cutter should only be used
once fully assembled!
– Before cutting up meat, remove gristle,
bones and sinews.
– The universal cutter is not suitable
for cutting up very hard items (coffee
beans, radishes, nutmeg) and frozen
food (fruit etc.).
X Fig. B
■ Place the container on a smooth, clean
work surface and press into position.
1. Insert blade.
Important: The blade must be positioned
straight in the container.
2. Add food.
Intended use en
9