Publicité
Les langues disponibles
Les langues disponibles
Tilt the machine forward and empty the
n
tank.
DE
Re-insert the screw and tighten it
n
securely.
•
Never fully close the bleeding
point if you leave the machine in
an area colder than 0 °C.
IMPORTANT (FOR UK ONLY)
If the moulded 3 pin plug attached to this
unit is damaged and needs replacing, it
is important that it is correctly destroyed
and replaced by an approved BS 1363/5A
fused plug and that the following wiring
instructions are followed.
The wires in this mains lead are coloured in
accordance with the following code:
blue
neutral
brown
live
green and yellow earth
As the colours of the wires in the mains
lead of this unit may not correspond to the
coloured markings identifying the terminals
in your plug, proceed as follows:
The wire which is coloured blue must
n
be connected to the terminal which is
marked with the letter N or coloured
black.
The wire which is coloured brown must
n
be connected to the terminal which is
marked with the letter L or coloured red.
The wire which is coloured green and
n
yellow must be connected to the terminal
which is marked with the letter E or
coloured green.
14
Publicité
