Télécharger Imprimer la page

Sharp SJ-BA10DMXPF-EU Guide D'utilisation page 7

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
CHAPTER -1: GENERAL WARNINGS
• We recommend that you wipe all shelving and trays with a cloth soaked in warm water mixed
with a teaspoon of bicarbonate of soda before use. After cleaning, rinse with warm water and dry.
• Install using the plastic distance guides, which can be found at the rear of the appliance. Turn 90
degrees (as shown in the diagram). This will keep the condenser from touching the wall.
• Refrigerator should be placed against a wall with a free distance not exceeding 75 mm.
Before using your fridge freezer
• Before setting up your fridge freezer, check for any visible damage. Do not install or use your fridge freezer
if it is damaged
• When using your fridge freezer for the first time, keep it in an upright position for at least 3 hours before
plugging into the mains. This will allow efficient operation and prevent damage to the compressor.
• You may notice a light odour when using your fridge freezer for the first time. This is perfectly normal and will
fade away as the fridge starts to cool.
Information about new-generation cooling technology
Fridge freezers with new-generation cooling technology have a different working system than static fridge freezers. In
normal fridge freezers, humid air entering the freezer and the water vapour emanating from the foods, turns into frost
in the freezer compartment. In order to melt this frost, in other words defrost, the fridge has to be unplugged. In order
to keep foods cold during the defrosting period, the user must store the food elsewhere and the user must clear the
remaining ice and accumulated frost.
The situation is completely different in freezer compartments equipped with new-generation cooling technology. With
the aid of fan, cold and dry air is blown throughout the freezer compartment. As a result of the cold air that is blown
easily throughout the compartment – even in the spaces between shelves – foods are frozen equally and properly. And
there will be no frost.
The configuration in the refrigerator compartment will be nearly same as the freezer compartment. Air emitted by the
fan located at the top of refrigerator compartment is cooled while passing through the gap behind the air duct. At the
same time, air is blown out through the holes on the air duct so that cooling process is successfully completed in the
refrigerator compartment. Holes on the air duct are designed for even air distribution throughout the compartment.
Since no air passes between the freezer and refrigerator compartment, odours will not mix.
As a result, your fridge with new-generation cooling technology is easy to use and it offers you an access to a huge
volume and aesthetic appearance.
CHAPTER -2: YOUR FRIDGE FREEZER
This appliance is not intended to be used as a built-in appliance.
This figure has been drawn for informational purposes to show the various parts and accessories in the appliance.
Parts may vary according to the appliance model.
Fridge compartment
Wine rack *
Fridge shelves
Door upper shelf
Door shelf / Adjustable door shelf *
Interior display / In room control
Chill drawer *
Crisper cover
Bottle shelf
Crisper
Freezer - top basket
Freezer - middle basket
Freezer compartment
Freezer - bottom basket
Levelling feet
EN -6-
Egg holder
Ice tray
* In some models

Publicité

loading