Publicité
Les langues disponibles
Les langues disponibles
8.
BRIGHT SWITCH
Pressing this switch to the "IN" position will boost or increase the high frequency content of your bass
guitar tone. Though this effect does produce sharper, more crisp tones, it does make string noise more
apparent.
9.
EQUALIZATION
The EQ featured on the Basic 112 offers four-band tone adjustment. Each EQ control is active and has
a predetermined center frequency. At the "5" position (12 o'clock) the control, effectively, does not
alter your tone. Reducing the control to the "0" position (fully counterclockwise) introduces
maximum cut in level for the particular band. Increasing the control to the "+10" position (fully
clockwise) introduces maximum gain in level for the particular band low, low-mid, high-mid and
high bands are available for adjustment. Observe the Basic 112 Specifications for more detail on the
equalizer.
10.
EFFECTS LOOP
This pair of mono 1/4" jacks supply an effects SEND and RETURN path for the preamp signal.
Connect the SEND jack to the input of external, low-level, signal processing equipment (effects).
Return the signal from your external equipment to the RETURN jack. This is known as an Effects
Loop since the signal exits your amp (send) and loops (return) back to it.
11.
VOLUME
The Volume control adjusts the overall volume level of the amplifier. Adjusting this control so that its
level is greater than the pregain setting will result in less overall distortion.
12.
HEADPHONES
This stereo 1/4" jack accepts a standard pair of headphones. Using this jack defeats the output to the
speaker making it ideal for quiet practice applications. Use only stereo headphones.
Publicité
