Télécharger Imprimer la page

Peavey BASIC Serie Mode D'emploi page 4

Publicité

Les langues disponibles

Les langues disponibles

2.
POWER SWITCH
Placing this switch in the "ON" position applies power to the unit when proper power is supplied to the
AC Power Cord.
A
EXTERNAL SPEAKER JACK
This 1/4" jack is provided for the connection of an external speaker cabinet. The minimum external
speaker impedance is 8 ohms.
MINX 110 FRONT PANEL
POWER LED
This LED illuminates to indicate power has been applied to the unit and the unit is on.
5. INPUT
This 1/4" mono jack is the input for your bass guitar. Always use a high quality, shielded instrument
cable when connecting your bass guitar to the input jack.
6. BRIGHT SWITCH
Pressing this switch to the "IN" position will boost or increase the high frequency content of your bass
guitar tone. Though this effect does produce sharper, more crisp tones, it does make string noise more
apparent.
7.
PRE GAIN
The Pre Gain control sets the input level to the amplifier. Adjusting this control fully clockwise will
result in maximum gain. This setting may change from instrument to instrument due to the various
electrical characteristics found in bass guitars.
8.
EQUALIZATION
The EQ featured on the Minx 110 offers three-band tone adjustment. Each EQ control is passive. At the
"10" position (fully clockwise) the control does not introduce an attenuation of the band. Reducing the
control to the "0" position (fully counterclockwise) introduces maximum cut in level for the particular
band. Low, Mid and High bands are available for adjustment.
9.
EFFECTS LOOP
This pair of mono 1/4" jacks supply an effects SEND and RETURN path for the preamp signal.
Connect the SEND jack to the input of external, low-level, signal processing equipment (effects).
Return the signal from your external equipment to the RETURN jack. This is known as an Effects
Loop since the signal exits your amp (send) and loops (return) back to it.
10.
HEADPHONES
This stereo 1/4" jack accepts a standard pair of stereo headphones. Using this jack defeats the output to
the speaker making it ideal for quiet practice applications. Use only stereo headphones.

Publicité

loading

Ce manuel est également adapté pour:

Minx serieBasic 112Minx 110