klover AURA 100 Instructions D'utilisation page 51

CS.A80.IST-1 / Rev 1.0 ENGLISH
11 12
Remove the front panel below. To remove it, unscrew both screws (fig. 11 and 12).
On AURA 100, AURA 120, REA 100, OMEGA and OMEGA PLUS the bottom front panel is fastened with a hinge and, therefore, does not need to
be removed.
13 14
After having removed the front panel below (fig. 13), remove the inspection vent, unscrewing the two screws (fig. 14).
15 16
After having removed the vent, vacuum the residues inside the compartment (fig. 15).
To ensure correct operation, it is necessary to remove the sawdust deposited on the base of the tank (fig. 16) at least once every 30 days. The
pellet tank must be emptied at the end of every season.
Cleaning the vermiculite
The vermiculite does not require special maintenance and if required should only be gently dusted with a brush. In order not to compromise its working
life, cleaning should not be carried out using abrasive sponges or using the vacuum cleaner pipe in direct contact.
24