AKASO BRAVE 7 LE Manuel D'utilisation page 23

EN
Burst Photo
To capture burst photos, first verify the camera is in Burst Photo mode, then press
the photo button. The camera will emit a shutter sound indicating the completion
of the shot.
Time Lapse
To capture time lapse photos or videos, first verify the camera is in Time Lapse
mode, then press the Photo or Video button.
Replacing the CR2032 battery of the remote
1. Use a screwdriver to remove the 4 screws on the back cover of the remote,
allowing you to open it.
2. Remove another 4 screws on the remote's circuit board.
21