AKASO BRAVE 7 LE Manuel D'utilisation page 17

EN
13. Language
English/ Deutsch/ Français/ Italiano/Español/Português/日本語 (Default setting:
English)
Set the system language that appears in your Brave 7 LE camera.
14. Format Card
Yes/No (Default setting : No)
To keep your memory card in good condition, reformat it on a regular basis.
Reformatting erases all of your content, so be sure to offload your photos and
videos first.
15. System
Factory Reset/System Info/Card Info
This setting allows you to reset your camera and check the system or card
information.
16. Factory Reset
Yes/No (Default setting: No)
This option resets all settings to their default values.
System Info: Check the model and firmware version of your camera.
Card Info: Check the card capacity and remaining space of your memory card.
Note: Some functions cannot be used at the same time. Please refer to the
information below.
Electronic image stabilization
Electronic image stabilization
Slow Motion
Auto Low Light
Diving mode
White balance: Daylight, Shade,
Tungsten Light, White Fluorescent
Video resolution: 1080P120fps,
720P240fps, 720P120fps
Distortion Calibration, Auto Low Light
Video resolution: 4K30fps, 2.7K30fps,
1080P30fps
Video resolution: 4K30fps, 2.7K30fps,
1080P30fps; Image Stabilization
Effect
Effect
15