AKASO BRAVE 7 LE Manuel D'utilisation page 16

EN
Note: Distortion Calibration will be disabled when Image Stabilization is turned on.
6. Driving Mode
Off/On (Default setting: Off)
When Driving Mode is enabled and the camera is connected to a car cigarette lighter,
it automatically powers on and begins recording video once the car engine is started,
It will stop recording and power off automatically when the engine is turned off.
7. Upside Down
Off/On (Default setting: Off)
Determine the orientation of your video or photos to help you prevent upside down
footage.
Note: The user interface will be upside-down when this option is enabled.
8. Screen Saver
Off/1 Min/3 Min/5 Min (Default setting: 1Min)
Determine when the camera's display should go dormant to conserve battery. If you
need the screen back on, just tap it or press any button.
9. Auto Power Off
Off/1 Min/3 Min/5 Min (Default setting: 3 Min)
Set the duration of inactivity after which the camera automatically powers off. If not
operated within the chosen duration, the camera will shut down.
10. Power Frequency
50Hz/60Hz (Default setting: 50Hz)
Choose the line frequency at which the video is recorded.
11. White Balance
Auto/Daylight/Shade/Tungsten Light/Fluorescent (Default setting: Auto)
White Balance fine-tunes the color temperature of your videos and photos, ensuring
optimal color accuracy in both warm and cool lighting conditions.
12. Date & Time
Manually set the camera's date and time according to your local time.
Tip: The date and time will also be automatically updated when you connect your
camera to the AKASO GO app.
14