EN
8. Metering
Center/Multi (Default setting: Multi)
The metering mode refers to the way in which the camera determines exposure.
9. Date Stamp
Off/Date/Date & Time (Default setting: Date & Time)
A watermark will be added to the video based on your preferred settings. For example,
if you choose the Date & Time option, the current date and time will be stamped on
your video. You can choose to disable this setting by selecting the "Off" option.
Photo Setup
1. Photo Resolution
20MP/16MP/14MP/10MP/8MP/5MP/2MP (Default setting: 20MP)
Set the photo resolution before capturing photos. This camera is capable of
capturing up to 20MP photos.
2. Image Quality
High/Middle/Low (Default setting: High)
Adjust the level of details in your captured photos.
3. ISO
Auto/100/200/400/800/1600/3200 (Default setting: Auto)
ISO determines the camera's sensitivity to light, and creates a trade-off between
brightness and resulting image noise. Image noise refers to the degree of graininess
in the image. In low light, higher ISO values result in brighter images, but with greater
image noise. Lower values result in lower image noise, but darker images.
4. EV
-2.0/-1.0/0/+1.0/+2.0 (Default setting: 0)
By default, your camera uses the entire image to determine the appropriate
exposure level. However, exposure lets you select an area that you want the camera
to prioritize when determining exposure. This setting is particularly useful in shots
where an important region might otherwise be over-or underexposed.
12