9.
Reattach all the parts you removed in step 7 onto the other side. Place the hinge cover (1) on the left
side and fix with the screws (4). Place the left foot (2) and screw (5) on the right side. Finally, place
the adjustable foot (3) on the left side.
10. Place the lower door on the lower hinge. Rotate the centre hinge 180° and reattach it to the unit
with the screws.
11.
Take the upper hinge, remove the hinge pin, turn the hinge cover around and refit the hinge pin.
12. There is a cover at the top of the refrigerator (1) over the screw holes on the left side. Remove this
and place it on the right side (2).
13.
Place the upper door on the centre hinge. Install the upper hinge (1) and secure with the screws (2).
The accessory bag contains a hinge cover (3), place this over the hinge at the top of the appliance.
Push the cover from left to right first, and then down.
50
DO91933
1
4
3
1
5
2
2
3
2
1