TROUBLESHOOTING
In case of mini-function, please refer to the following table ;
Problem
Possible causes
3 lamps
for power
The rolling bar is wrapped.
indicator
Temperature is too high or low.
flicker.
Power
Brush is trapped by hair or
brush
larger debris.
does not
work.
Running
Battery needs to be replaced
time
Ambient temperature is too high
shortened.
or too low
Battery is no fully charged.
The dust cup is full.
The
The filter is blocked.
vacuum
Suction inlet of brush or other
has no
accessory is blocked.
suction
Parts of the appliance is not fully
power.
dried after cleaning.
Ambient temperature when
Not
charging is too low or too high.
charging.
Solution
Cleaning the rolling bar.
Move the vacuum to
suitable temperature.
Ensure that no hair or other
thread is trapped around
the brush and check brush
area for larger debris.
Contact the shop or after
sales service to replace
the battery fat the user's
own cost Your vacuum
should only be operated
in suitable ambient
temperature
The battery needs
charging
Clean the dust cup
after use to prevent
blocking.
Remove any dust or debris
from the filter. Check for
blockages at brush and
other attachment points.
Ensure that all components
are properly dried after
washing.
Charge the machine under
the right temperature
environment (5 -40 ).
EN-15