Double Insulation; Electrical Safety - Sandri Garden GI3000 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
UK
are defective; discard all defective parts
and fit new parts before use.
Keep all nuts, bolts and screws tight
to be sure your mower is in a safe
working condition.

3) DOUBLE INSULATION

Your mower is double insulated. This
means that all external metal parts are
electrically isolated from the power supply.
This is achieved by placing an extra
insulation barrier between the electrical
and mechanical parts. Double insulation
means greater electrical safety and
obviates the necessity of having your
mower earthed.

4) ELECTRICAL SAFETY

Always switch the appliance off before
disconnecting any plug, socket or
extension.
Increased safety can be obtained by having
a qualified electrician install a high sensitivity
(30mA) circuit breaker in the house wiring.
If you do not have such a circuit breaker
installed, or you do not wish to have one
installed, then we strongly recommend that
the electrical power to your mower be
supplied through a high sensitivity (30mA)
residual current device (RCD). The RCD is
designed to provide a high degree of perso-
nal protection against harmful electric
current should fault conditions occur.
Warning! The use of an RCD or other
circuit breaker unit does not release
the operator of your mower from the
10/
60
INSTRUCTION MANUAL
5) HANDLE ASSEMBLY (FIG. B
& C)
6)
ADJUSTMENT (FIG. D)
The wheels are already pre-mounted. To
select a height of cut, move the wheels
(4) into the slot required using the spring
system (21). To ensure an even cut,
please make sure that all four wheels are
placed in the same position.
7) GRASSBOX ASSEMBLY
(FIG. E)
Read the safety instructions at the
beginning of this manual before using this
accessory.
safety instructions and safe working
practices given in this manual.
Fit the lower supports (9) in the two holes
in the machine body and fasten them
with the screws provided.
Join the upper grip (8) to the lower
supports (9) by means of the wing nuts
and bolts provided.
HEIGHT
Warning! Disconnect your mower
from the electrical supply before
making any adjustment and allow the
blade to stop rotating. Cutting blades
are sharp.
The grass collection basket consists of
a plastic and cloth container (18)
supported by a "U" rod (19) which must
be put together before fitting to the
OF
CUT

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gi3600

Table des Matières