Publicité
Les langues disponibles
Les langues disponibles
Getting to Know Your Popcorn Popper
Product may vary slightly from illustration
Figure 1
Steam Holes
Clear Popcorn
Maker Lid
Popcorn Maker Base
Polarized Plug
(not shown)
Do not overfill the machine with popcorn.
Power rating 850w, Voltage : AC 120V/60Hz
Before Using for the First Time
1. Carefully unpack the Popcorn Popper and remove
all packaging materials.
2. Wash lid cap and clear Popcorn Popper lid in
warm, soapy water; rinse and dry thoroughly.
3. Place the base on a clean, flat, heat-resistant
working surface.
CAUTION: During popping, the base gets hot.
Make sure the surface is able to withstand heat or
use a trivet to protect the working surface.
4. Remove the rotating rod from the base by turning
the securing knob counter-clockwise. Remove the
securing knob and set aside. (See Figure 2.)
5. Pull the rotating rod up and off the center stem.
Clean the rod with a slightly soapy sponge
or cloth. Wipe with a clean, damp cloth and
dry thoroughly.
6. Clean the base's non-stick popping plate with
a soapy sponge or cloth. Wipe with a clean,
damp cloth and dry thoroughly.
7. Fit the rotating rod into the notch on the
center stem. Add the securing knob and turn
clockwise until fastened. Make sure rotating rod
turns freely.
8. The Popcorn Popper is now ready for use.
All manuals and user guides at all-guides.com
Figure 2
Center Knob
Rotating Rod
Center Stem
4
Securing
Knob
Lid Cap
Lid Handles
Base Handles
ON/OFF Button
Publicité
