nedis TVRC2340BK Guide De Démarrage Rapide page 7

4 If your device switches on or mutes, the remote is ready
for use.
4 If your device does not switch off or mute, follow the steps
in the next chapter.
Automatic search for TV/SAT
1. Switch on your TV or SAT.
2. Press and hold the button corresponding to your device
yu
(TV/SAT A
3. Aim the remote at your device.
4. Press and hold the mute button A
4 The LED indicator A
codes.
4 After one batch of codes, the LED indicator A
for 15 seconds and then switches off.
4 When your device is muted, the correct code has been
found within the batch of codes.
5. Release the mute button A
4 Every 3 seconds, the product tries one of the codes from the
batch to find the correct code.
6. When your device is unmuted again, press the OK button
w
to confirm.
A
4 The LED indicator A
7. Aim the remote at your device.
8. Press the on/off button A
the product.
4 If your device switches on or mutes, the remote is ready
for use.
4
If your device does not switch off or mute, follow the steps
in the next chapter.
Automatic brand search
1. Switch on your device.
2. Open the code list.
4 The codes are arranged in order of brand, device, type.
3. Check if the brand of your device is listed.
4. Check what button corresponds to your brand.
5. Press and hold the button corresponding to your device
(TV/SAT/DVD/DVB-T A
6. Press and hold the buttons corresponding to your brand
together for 5 seconds.
7. Release the buttons when the LED indicator A
times.
8. Aim the remote at your device.
9. Press and hold the on/off button A
10. Every second, the product tries a new code.
) for 3 seconds.
4
flashes rapidly while trying multiple
4
.
4
switches off and the code is saved.
1
or the mute button A
rtyu
7
4
.
4
) for 5 seconds.
4
1
.
lights up
4
to test
flashes 3