nedis TVRC2340BK Guide De Démarrage Rapide page 6

4 If your device switches on or mutes, the remote is ready
for use.
4 If the device does not switch off or mute, repeat steps 4-5
using another code.
4 If no buttons are pressed for 30 seconds, the remote exits
programming mode and the LED switches off.
Programming the product to the device
manually
1. Switch on your device.
2. Press and hold the button corresponding to your device
(TV/SAT/DVD/DVB-T A
4 The LED indicator A
3. Aim the remote at your device.
4. Press the channel up button A
press the channel down button A
code.
4 When your device switches off, the code is correct.
5. Press the OK button A
4
The LED indicator A
6. Aim the remote at your device.
7. Press the on/off button A
the product.
4
If your device switches on or mutes, the remote is ready
for use.
4 If your device does not switch off or mute, follow the steps
in the next chapter.
4
If no buttons are pressed for 30 seconds, the remote exits
programming mode and the LED switches off.
Automatic search
1. Switch on your device.
2. Press and hold the button corresponding to your device
(TV/SAT/DVD/DVB-T A
4 The LED indicator A
3. Aim the remote control at your device and press and hold
the on/off button A
4 The LED indicator A
new code is sent out.
4
When your device switches off, the code is correct.
4. Press the OK button A
4 The LED indicator A
5. Aim the remote at your device.
6. Press the on/off button A
the product.
rtyu
4
lights up.
5
6
w
to confirm.
4
switches off and the code is saved.
1
or the mute button A
rtyu
4
lights up.
1
for 3 seconds.
4
flashes once every 2 seconds when a
w
to confirm.
4
switches off and the code is saved.
1
or the mute button A
6
) for 3 seconds.
to try the next code and
to try the previous
) for 3 seconds.
4
to test
4
to test